30L-32000L Pressura vas Steel Jacketed Reactor
CE, ASME, PED, MOM
Minimum Ordinis Quantity:
Satus procul $ 30,000
Lignea grabatis / cartons / plastic proten-wrap
T / T
LXXX SET / ANNO
SS304, SS316L, Titanium, Hastelloy, PTFE lined and other materials
This equipment is used in the process of hydrolysis,neutralization,crystallization,distillation and evaporation in pharmaceutical,chemical, food, light and other industries.
➤The reaction kettle is composed of kettle body, kettle cover, agitator, heating jacket, supporting and driving devices, seal devices, and etc. and equipped with electric heating rods.
➤Considering clients’ different producing technology and operating conditions, usually mixing patterns are divided into anchor,propeller, turbo, push or frame. The support seat has two kinds, hanging or back supporting type. There are holes for oil in and out, venting, and temperature monitoring in the jacket. At the bottom of the kettle, there is a discharge hole.Cycloidal pinwheel reducer, variable-speed reducer and others could be applied in the rotating mechanism. The sealing device can use machines; Sleeve, semi-tube and coil pipe structure can be used in heating and cooling. There are several heating mode,such as steam, electric heating, heat conduction oil, etc. In order to meet different requirements of acid-and alkali-proof,high temperature resistance, wear resistance, corrosion resistance and others under diffrent working environments, reaction kettles can be designed and manufactured based on clients’ requests.
➤Materials of the reaction kettle are heated by jacket.
➤The vent pipe installed in the upper part of the jacket should be unblocked.
➤Oil should be slowly heated, especially in the first warming period, you should pay attention to preventing oil and steam from blasting boiling.
➤If there are no materials (heat absorbing medium) in the kettle, don’t heat jacket for testing.
➤The heating speed and insulation status(on/off) can be adjusted by valves or temperature controller
Inner tank diameter
Jacket Size (mm)
* 4 2KW
* 6 2KW
* 18 5KW
Design / Calculus Software
Our Products ad pharmaceutical et chemica industries
Multifunctional "Tres in Uno" (eliquare, lavare et siccare)
2. Crystallizing Lacus, Reactio Kettle
3. Sterilis bilinguis dryer
4. Rake Vacuum Dryer / Paddle Vacuum Dryer
5. Plate-fin Calor exchanger
1. Praecipua Equipment: Pressura Equipment, Apparatus materiae anti-corrosionis factae, Apparatus sterilis
Apparatus e materiarum odii corrosione facta includit: tunica plastica anti corrosio / PTFE/ electri,
2.Customized Design: Double-Cone in 20L-20m³
Rake Dryer (cum sigillo mechanico) in XVI m³
DN300-DN600 "tres in unum"
Scop of negotium
1. De-site Inspectionis
2.Technical Innovation Plan for Equipment Technical Improvement Plan for Equipment's Structure Optimization Fast and Effective Solution to Equipment Malfunctions Highly Efficient and Precise On-site Construction Service Commitment to a deadline in Customization A full range of long-term on-site technicae sustentationis ministerium
4. Solutiones Technical
5.On-site Testis et Training
Part 6. Huic